Cygnus MR 500 Bedienungsanleitung PDF herunterladen (Seite 44)

Cygnus MR500 Taximeter User Manual

5.5.6 Comms Options

5.5.6.1 UART0/1 Baud Rate

Press and hold SELECT. The current baud rate will be displayed. While

holding the SELECT key, press EXTRAS to select different baud rates.

The default is 9600 baud - this will work with the PT73 receipt printer.

5.5.6.2 UART0/1 Parity

Press and hold SELECT. The current parity will be displayed. While

holding the SELECT key, press EXTRAS to select different parity types.

The default is None - this will work with the PT73 receipt printer.

Currently the default comms port for both printers and mobile data

terminals is UART0.

5.5.6.3 MDT Mode

Press and hold SELECT. The current MDT (Mobile Data Terminal)

system will be displayed. While holding the SELECT key, press

EXTRAS to select the different MDT systems A to D. The correct

system to select depends on the make of MDT installed in the vehicle.

If you do not have a MDT installed then this setting should be system A.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 77 78

Keine Kommentare

Cygnus MR 500 Bedienungsanleitung Seite 44